Home/ATT&CK Technique/Indicator Blocking
ATT&CK Technique

Indicator Blocking

T1562.006 · stealth

An adversary may attempt to block indicators or events typically captured by sensors from being gathered and analyzed. This could include maliciously redirecting or even disabling host-based sensors, such as Event Tracing for Windows (ETW), by tampering settings that control the collection and flow of event telemetry. These settings may be stored on the system in configuration files and/or in the Registry as well as being accessible via administrative utilities such as PowerShell or Windows Management Instrumentation.

For example, adversaries may modify the File value in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Security to hide their malicious actions in a new or different .evtx log file. This action does not require a system reboot and takes effect immediately. ETW interruption can be achieved multiple ways, however most directly by defining conditions using the PowerShell Set-EtwTraceProvider cmdlet or by interfacing directly with the Registry to make alterations.

In the case of network-based reporting of indicators, an adversary may block traffic associated with reporting to prevent central analysis. This may be accomplished by many means, such as stopping a local process responsible for forwarding telemetry and/or creating a host-based firewall rule to block traffic to specific hosts responsible for aggregating events, such as security information and event management (SIEM) products. In Linux environments, adversaries may disable or reconfigure log processing tools such as syslog or nxlog to inhibit detection and monitoring capabilities to facilitate follow on behaviors.

ESXi also leverages syslog, which can be reconfigured via commands such as esxcli system syslog config set and esxcli system syslog config reload.

WindowsmacOSLinuxESXi
◆

Actors Using This

4
chinaAPT41
north_koreaCitrine Sleet
latin_america_brazilian_organized_cybercrimeGrandoreiro
russia_apt_sandworm_adjacentHermeticWiper
◈

Likely Attack Path

Techniques the same actors pair with this one distinctively - those showing up among actors who use this technique noticeably more than across all actors (lift > 1.15), grouped by kill-chain phase. The × is that lift multiplier; the shared-actor count is in the tooltip. A near-universal technique pairs with everything at baseline, so its list is short by design.
resource-development same
T1608 · Stage Capabilities ×1.51
initial-access same
T1195 · Supply Chain Compromise ×4.35
persistence same
T1037 · Boot or Logon Initialization Scripts ×2.75
privilege-escalation same
T1134 · Access Token Manipulation ×4.41T1548 · Abuse Elevation Control Mechanism ×1.58
discovery same
T1614 · System Location Discovery ×2.03T1010 · Application Window Discovery ×1.49
lateral-movement same
T1570 · Lateral Tool Transfer ×1.82
collection same
T1560 · Archive Collected Data ×1.59
command-and-control same
T1568.002 · Domain Generation Algorithms ×1.57
impact same
T1486 · Data Encrypted for Impact ×1.94
other same
T1014 · Rootkit ×3.31T1553 · Subvert Trust Controls ×2.29T1620 · Reflective Code Loading ×2.23T1027.013 · Encrypted/Encoded File ×1.68
◈

Detection Coverage

1/6 layers
Coverage across standard detection surfaces. Rows marked none have no rule of that type mapped. Some are real blind spots worth closing; others are simply not applicable to this technique (e.g. YARA matches malware files, not network behaviour).
Behavioral / log (Sigma) none
Analytics (MITRE CAR) 2
Runtime / container (Falco) none
File / malware (YARA) none
Network (Suricata/Snort) none
Vuln scan (Nuclei) none
◈

CAR Analytics

2
MITRE Cyber Analytics Repository - field-tested detection logic for this technique, written as pseudocode/queries you adapt to your own SIEM (Splunk, Sentinel, EQL). Each is a ready starting point for a detection rule, not just a description.
CAR-2013-04-002Low coverageQuick execution of a series of suspicious commands

Certain commands are frequently used by malicious actors and infrequently used by normal users. By looking for execution of these commands in short periods of time, we can not only see when a malicious user was on the system but also get an idea of what they were doing.

Commands of interest
  • arp.exe.
  • at.exe.
  • attrib.exe.
  • cscript.exe.
  • dsquery.exe.
  • hostname.exe.
  • ipconfig.exe.
  • mimikatz.exe.
  • nbstat.exe.
  • net.exe.
  • netsh.exe.
  • nslookup.exe.
  • ping.exe.
  • quser.exe.
  • qwinsta.exe.
  • reg.exe.
  • runas.exe.
  • sc.exe.
  • schtasks.exe.
  • ssh.exe.
  • systeminfo.exe.
  • taskkill.exe.
  • telnet.exe.
  • tracert.exe.
  • wscript.exe.
  • xcopy.exe ### Output Description The host on which the commands were executed, the time of execution, and what commands were executed.
pseudocode
processes = search Process:Create
reg_processes = filter processes where (exe == "arp.exe" or exe == "at.exe" or exe == "attrib.exe"
 or exe == "cscript.exe" or exe == "dsquery.exe" or exe == "hostname.exe"
 or exe == "ipconfig.exe" or exe == "mimikatz.exe" or exe == "nbstat.exe"
 or exe == "net.exe" or exe == "netsh.exe" or exe == "nslookup.exe"
 or exe == "ping.exe" or exe == "quser.exe" or exe == "qwinsta.exe"
 or exe == "reg.exe" or exe == "runas.exe" or exe == "sc.exe"
 or exe == "schtasks.exe" or exe == "ssh.exe" or exe == "systeminfo.exe"
 or exe == "taskkill.exe" or exe == "telnet.exe" or exe == "tracert.exe"
 or exe == "wscript.exe" or exe == "xcopy.exe")
reg_grouped = group reg by hostname, ppid where(max time between two events is 30 minutes)
output reg_grouped
DNIF
_fetch * from event where $LogName=WINDOWS-SYSMON AND $EventID=1 AND $App=regex(arp\.exe|at\.exe|attrib\.exe|cscript\.exe|dsquery\.exe|hostname\.exe|ipconfig\.exe|mimikatz.exe|nbstat\.exe|net\.exe|netsh\.exe|nslookup\.exe|ping\.exe|quser\.exe|qwinsta\.exe|reg\.exe|runas\.exe|sc\.exe|schtasks\.exe|ssh\.exe|systeminfo\.exe|taskkill\.exe|telnet\.exe|tracert\.exe|wscript\.exe|xcopy\.exe)i group count_unique $App limit 100
>>_agg count
>>_checkif int_compare Count > 1 include
LogPoint
norm_id=WindowsSysmon event_id=1 image IN ["*\arp.exe", "*\at.exe", "*\attrib.exe", "*\cscript.exe", "*\dsquery.exe", "*\hostname.exe", "*\ipconfig.exe", "*\mimikatz.exe", "*\nbstat.exe", "*\net.exe", "*\netsh.exe", "*\nslookup.exe", "*\ping.exe", "*\quser.exe", "*\qwinsta.exe", "*\reg.exe", "*\runas.exe", "*\sc.exe", "*\schtasks.exe", "*\ssh.exe", "*\systeminfo.exe", "*\taskkill.exe", "*\telnet.exe", "*\tracert.exe", "*\wscript.exe", "*\xcopy.exe"]
| chart count() as cnt by host
| search cnt > 1
CAR-2020-09-003Low coverageIndicator Blocking - Driver Unloaded

Adversaries may attempt to evade system defenses by unloading minifilter drivers used by host-based sensors such as Sysmon through the use of the fltmc command-line utility. Accordingly, this analytic looks for command-line invocations of this utility when used to unload minifilter drivers.

Pseudocode - Pseudocode - fltmc invocation
processes = search Process:Create
fltmc_processes = filter processes where (
  exe = "fltmc.exe" AND command_line = "*unload*")
output fltmc_processes
Splunk - Splunk search - fltmc invocation
index=client EventCode=1 CommandLine="*unload*" (Image="C:\\Windows\\SysWOW64\\fltMC.exe" OR Image="C:\\Windows\\System32\\fltMC.exe")
LogPoint - LogPoint search - fltmc invocation
norm_id=WindowsSysmon command="*unload*" (image="C:\Windows\SysWOW64\fltMC.exe" OR image="C:\Windows\System32\fltMC.exe")
▣

Comply & Defend

NIST 800-53AC-02, AC-03, AC-05, AC-06, CA-07, CM-02, CM-05, CM-06, CM-07, CM-10, IA-02, IA-09, SC-08, SC-23, SI-03, SI-04, SI-07
Intelligence Graph · click any node to traverse
CVETechnique ActorTool Family
drag to reposition · click any node to traverse · button top-right enlarges
External lookups - second-class, for what we don’t hold ourselves
MITRE ATT&CKAtomic Red Teamcar (MITRE)
Vulnerabilities
CISA KEV catalog
CWE weaknesses
CAPEC attack patterns
Package vulnerabilities
Threat intelligence
Threat actors
Tools & malware
ATT&CK techniques
IOCs
Detection & defense
Sigma rules
YARA rules
Atomic Red Team tests
D3FEND countermeasures
Compliance
NIST 800-53
ISO 27001:2022
SOC 2 TSC
PCI-DSS v4.0
CIS Controls v8.1
About
All capabilities
Live statistics
Data sources
Privacy policy
Terms of service
threatengine.sh  ·  Open-source threat intelligence platform  ·  100+ authoritative sources  ·  Every fact traces to its origin