Home/CVE/In the Linux kernel, the following vulnerability has been resolved: arm64: mm: Handle invalid large leaf mappings corre
CVE

CVE-2026-31600

In the Linux kernel, the following vulnerability has been resolved: arm64: mm: Handle invalid large leaf mappings corre

In the Linux kernel, the following vulnerability has been resolved: arm64: mm: Handle invalid large leaf mappings correctly It has been possible for a long time to mark ptes in the linear map as invalid. This is done for secretmem, kfence, realm dma memory un/share, and others, by simply clearing the PTE_VALID bit. But until commit a166563e7ec37 ("arm64: mm: support large block mapping when rodata=full") large leaf mappings were never made invalid in this way.

It turns out various parts of the code base are not equipped to handle invalid large leaf mappings (in the way they are currently encoded) and I've observed a kernel panic while booting a realm guest on a BBML2_NOABORT system as a result: [ 15.432706] software IO TLB: Memory encryption is active and system is using DMA bounce buffers [ 15.476896] Unable to handle kernel paging request at virtual address ffff000019600000 [ 15.513762] Mem abort info: [ 15.527245] ESR = 0x0000000096000046 [ 15.548553] EC = 0x25: DABT (current EL), IL = 32 bits [ 15.572146] SET = 0, FnV = 0 [ 15.592141] EA = 0, S1PTW = 0 [ 15.612694] FSC = 0x06: level 2 translation fault [ 15.640644] Data abort info: [ 15.661983] ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000 [ 15.694875] CM = 0, WnR = 1, TnD = 0, TagAccess = 0 [ 15.723740] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 15.755776] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081f3f000 [ 15.800410] [ffff000019600000] pgd=0000000000000000, p4d=180000009ffff403, pud=180000009fffe403, pmd=00e8000199600704 [ 15.855046] Internal error: Oops: 0000000096000046 [#1] SMP [ 15.886394] Modules linked in: [ 15.900029] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 7.0.0-rc4-dirty #4 PREEMPT [ 15.935258] Hardware name: linux,dummy-virt (DT) [ 15.955612] pstate: 21400005 (nzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 15.986009] pc : __pi_memcpy_generic+0x128/0x22c [ 16.006163] lr : swiotlb_bounce+0xf4/0x158 [ 16.024145] sp : ffff80008000b8f0 [ 16.038896] x29: ffff80008000b8f0 x28: 0000000000000000 x27: 0000000000000000 [ 16.069953] x26: ffffb3976d261ba8 x25: 0000000000000000 x24: ffff000019600000 [ 16.100876] x23: 0000000000000001 x22: ffff0000043430d0 x21: 0000000000007ff0 [ 16.131946] x20: 0000000084570010 x19: 0000000000000000 x18: ffff00001ffe3fcc [ 16.163073] x17: 0000000000000000 x16: 00000000003fffff x15: 646e612065766974 [ 16.194131] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 16.225059] x11: 0000000000000000 x10: 0000000000000010 x9 : 0000000000000018 [ 16.256113] x8 : 0000000000000018 x7 : 0000000000000000 x6 : 0000000000000000 [ 16.287203] x5 : ffff000019607ff0 x4 : ffff000004578000 x3 : ffff000019600000 [ 16.318145] x2 : 0000000000007ff0 x1 : ffff000004570010 x0 : ffff000019600000 [ 16.349071] Call trace: [ 16.360143] __pi_memcpy_generic+0x128/0x22c (P) [ 16.380310] swiotlb_tbl_map_single+0x154/0x2b4 [ 16.400282] swiotlb_map+0x5c/0x228 [ 16.415984] dma_map_phys+0x244/0x2b8 [ 16.432199] dma_map_page_attrs+0x44/0x58 [ 16.449782] virtqueue_map_page_attrs+0x38/0x44 [ 16.469596] virtqueue_map_single_attrs+0xc0/0x130 [ 16.490509] virtnet_rq_alloc.isra.0+0xa4/0x1fc [ 16.510355] try_fill_recv+0x2a4/0x584 [ 16.526989] virtnet_open+0xd4/0x238 [ 16.542775] __dev_open+0x110/0x24c [ 16.558280] __dev_change_flags+0x194/0x20c [ 16.576879] netif_change_flags+0x24/0x6c [ 16.594489] dev_change_flags+0x48/0x7c [ 16.611462] ip_auto_config+0x258/0x1114 [ 16.628727] do_one_initcall+0x80/0x1c8 [ 16.645590] kernel_init_freeable+0x208/0x2f0 [ 16.664917] kernel_init+0x24/0x1e0 [ 16.680295] ret_from_fork+0x10/0x20 [ 16.696369] Code: 927cec03 cb0e0021 8b0e0042 a9411c26 (a900340c) [ 16.723106] ---[ end trace 0000000000000000 ]--- [ 16.752866] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 16.792556] Kernel Offset: 0x3396ea200000 from 0xffff8000800000 ---truncated---.

HIGH · CVSS 7.5 EPSS 0.00039
Schedule remediation
  • CVSS base score ≥ 7.0
Sigma rules0 YARA rules0
Look this up elsewhere - one-click external pivots
How to read a CVE - triage first, then detect and patch
This page is every public fact about CVE-2026-31600, cross-linked. Its job is to answer one question fast - does this need my attention now? - and then hand you the two things you do about it. Here is how an analyst reads it.
Triage: should I act now? Four signals, and they are not interchangeable:
CVSSseverity - how bad it is IF exploited, 0-10. A high CVSS alone is not urgency; a flaw can be a perfect 10 and never actually be attacked. EPSSprobability - a model’s estimate of the chance it is exploited in the next 30 days, 0-1. This is the “will it actually happen” signal. CISA KEVconfirmed - it is being exploited in the wild right now. The strongest signal on the page; KEV beats any score. Weaponisedavailability - public exploits / PoCs, and especially Metasploit modules rated Excellent / Great. Reliable, packaged exploit code means low-skill attackers can use it today.
How they combine: KEV, or a dependable Metasploit module, means patch now regardless of CVSS. High CVSS + low EPSS + no exploit is real but not an emergency - schedule it. Low CVSS but KEV-listed still gets patched now. The verdict above already weighed these for you; this is how it got there.
Then what - two workflows:
Detectwhen you cannot patch today, follow this CVE to the ATT&CK techniques it enables, then Build a SIEM detection (the green button) - author a rule, test it in Atomic, deploy it. That buys visibility while the patch waits. PatchAffected products / packages tell you if you are exposed; Fixed versions by distribution and Vendor advisories give the exact version that closes it.
Reading order for the panels below: verdict + badges, then Public exploits / Metasploit (is it weaponised), then ATT&CK techniques + Sigma / IDS rules (can I detect it), then Affected products / packages + Fixed versions (am I exposed, what patches it), then Threat actors / IOCs (who uses it), then Scoring & timeline / references (the evidence).

ATT&CK techniques

1

Techniques this CVE enables - linked via CWECAPECATT&CK. High◆ = named directly in ATT&CK or Nuclei templates.

▤ Build a SIEM detection for these techniques

Weakness Classification

Affected Products & Versions

3
linux kernel>= 6.18 and < 6.18.24
linux kernel>= 6.19 and < 6.19.14
linux kernel>= 7.0 and < 7.0.1

Scoring & Timeline

7.5
HIGH · CVSS v3.1 · 416baaa9-dc9f-4396-8d5f-8c081fb06d67
View on NVD
Attack Vector
Network Adjacent Local Physical
Attack Complexity
Low High
Privileges Required
None Low High
User Interaction
None Required
Scope
Unchanged Changed
Confidentiality
None Low High
Integrity
None Low High
Availability
None Low High
Published to NVD24 Apr 2026 · 03:16 PM
CVSS VectorCVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

Vendor Advisories

2
suse-csafopenSUSE-SU-2026:10703-1
SOC and Response
CVE triage
Stack monitoring
Am I affected
IOC triage
KEV catalog
Daily brief
Change tracking
Detection Engineering
Coverage workspace
Detection coverage
Coverage check
Telemetry ceiling
SIEM query builder
Sigma rules
SIEM rules
YARA rules
Network rules
D3FEND
Threat Hunting
Threat actors
ATT&CK techniques
Attack paths
Indicators
Atomic tests
Red Team and Pentest
Exploitability triage
Recon pack
Attack paths
CAPEC patterns
Adversary emulation
Compliance and GRC
Framework mapping
Control assessment
Audit view
Coverage report
Atlas Search Threat actors Techniques Tools & malware CWE CAPEC KEV catalog Package vulns
About All capabilities Pricing API docs Live status Privacy policy Terms of service
threatengine.sh